How do I reset my Lexmark fuser?

Press and hold and while turning the printer on. Release the buttons when the clock appears. CONFIG MENU appears on the first line of the display. Press until you see Reset Fuser Cnt, and then press .

What is a fuser error on a Lexmark printer?

A Service Fuser message means that the printer has detected some sort of problem with the fuser unit installed on this printer. The fuser unit is the part of the printer that heats up to fuse the toner onto the page. If the fuser error returns, you can try reinstalling the fuser unit.

How do I fix a fuser error on my printer?

Solution one: Reset the printer

1. Press the Power button to turn off the printer.
2. Disconnect the power cord from the rear of the printer.
3. Wait 30 seconds, and then reconnect the power cord.
4. Press the Power button to turn on the printer. Wait for the product to start.
5. Try printing again.

How do you reset the fuser on a Lexmark cs725?

From the home screen, touch Settings > Device > Maintenance > Configuration Menu > Supply Usage And Counters. Select Fuser Reset or ITM Reset.

How do you fix a fuser error?

What is the fuser on a printer?

Definition of FUSER UNIT: A component found in electrostatic printers, laser printers, and xerographic printers and photocopiers. The fuser unit is used to permanently bond toner to a substrate by applying heat and pressure. A fuser unit is made up of two rollers; one to apply heat and one to apply pressure.

How do you fix a 50.9 fuser error?

Yes, it is commonly a Fuser related issue.

1. Verify the fuser is installed correctly and fully seated.
2. Turn off the printer, remove and reseat the fuser.
3. if same issue, replace the Fuser unit.
4. If no go, then need to replace the DC controller PCA.

Why is my Lexmark printer displaying a service fuser error?

Perform this test even if the printer has been working correctly in the past with this surge device. Power strips and uninterrupted power supplies can cause a low amperage problem, which can trigger a false fuser error. This is especially important if the fuser error occurs intermittently.

Why does my Lexmark printer say 922 instead of 920?

920, 921, or 922 Fuser Error: The printer thinks the fuser unit is not heating up to the correct operating temperature. This can be due to a bad fuser lamp or possibly no power getting to the fuser unit.

What kind of error is 920.01 service fuser?

In most cases, a 920 – 925 type numeric error also accompanies the message. An example would be a 920.01 Service Fuser message. If this is the first time you have seen the error, power off the printer.

What to do if you get a fuser error?

The meaning of the fuser error depends on the error code number associated with it. The first thing to do for any fuser error is to power off the printer. Let it rest for one minute or more, then power it back on.