How powerful is Xbox 360 GPU?

The GPU is operating at a frequency of 500 MHz, memory is running at 700 MHz. Its power draw is rated at 203 W maximum. The console’s dimensions are 310 mm x 269 mm x 79 mm, and it features a igp cooling solution. Its price at launch was 399 US Dollars.

What GPU does Xbox 360 use?

The Xbox 360 boasts the new, custom-built 500-MHz ATI Graphics Processor card with 10 MB of embedded DRAM. While the 500-MHZ graphics processor is powerful, and 10 MB of DRAM provides ample memory for the GPU to do its job, the most innovative thing about this card is that it is built on unified shader architecture.

What is reflowing a GPU?

Reflow is the stage of “reflowing solder” where the ‘solder’ or ‘solder paste’ changes its state from Solid to Liquid, at high heat temperature to make a complete and proper solder joint on PCB (printed board circuits).

What do I need to reflow my Xbox 360 motherboard?

You’ll need the high temperature output of a heat gun to accomplish the reflow. Reflowing the motherboard of your Xbox 360 allows the solder balls located beneath the CPU, GPU, RAM, and other chips to reconnect with their contacts on the motherboard.

What should the temperature be on a reflow Xbox 360?

So after ten minutes of pre-heating the board, I begin the hot air reflow. Make sure that the air pressure is at 5 1/2 (thats the dial in the bottom right of the unit). The lowest temperature the unit can go to is 90C, so after I turn it on I wait to time until the actual temperature (bottom number) reaches 90.

What kind of graphics card does Xbox 360 have?

Graphics card on the XBox 360 is based on an AMD design, and the system has 48 unified shaders, running at 500MHZ.

Can a heat gun be used to reflow an Xbox?

Now some people claim they can reflow their Xbox using a heat gun or an oven, but to reflow properly you need the proper equipment. Here’s what you need to perform a successful and professional quality reflow.