What are 5 safety rules for a jointer?
What are 5 safety rules for a jointer?
The following is a list of safety precautions to take into account when operating a jointer.
- Always read and follow the manufacturer’s instructions.
- Wear ear and eye protection, and do not wear jewelry, long sleeves, or loose clothing.
- Use paddles, push blocks, and push sticks to keep your hands 6 in.
What are the safety rules for a jointer?
Safety Rules Always run dust collection with jointer. Keep hands 4” away from cutter head. Never pass hands over cutter head. Don’t place thumbs at end of piece.
What is the safety clearance on the jointer?
Keep your hands away from the cutterhead even through the guard is in position. Maintain at least a 6” margin of Safety!!!
What is the shortest length of board that is safe to pass over the jointer?
3 cm (1/16″) in one pass. Do not join (edge) stock of pieces less than 30 cm (12″) long, 2 cm (3/4″) wide and less than . 6 cm (1/4″) thick.
What causes kickback on a jointer?
A board or piece of one, resting on top of the cutter head will experience a force moving it to the operator’s right. If that force is unopposed by the operator adequately pressing the board down and to the left, the board may be thrown to the right. This motion is known as “kickback”.
What is the maximum cut for jointing an edge?
Cuts should be no deeper than 1/8 inch per pass. To use the jointer to smooth edges, feed the wood into the tool with the rough edge facing down. Feed the wood through the jointer as many times as needed to achieve a straight edge. This process is useful for straightening a warped board.
What jobs can be done with a jointer?
4 Things You Can Do with a Jointer
- Flattening One Face of a Board. A jointer won’t allow you make two parallel faces, but you can get one straight and flat surface on the jointer before feeding the board through your planer.
- Squaring One Edge of a Board to One Face.
- Making Tapered Legs.
- Trimming Doors to Size.
Can you thickness on a jointer?
If you run the other rough face on the jointer, you can certainly make it flat but you won’t make it parallel to the first face. That makes for a board that’s thicker at one end than the other. And speaking of thickness, a jointer will not allow you to easily thickness boards to a precise dimension.
What is the minimum thickness you can flatten on the jointer?
A good rule of thumb would be about ¾” minimum thickness and the minimum length of 12”. The maximum width that can be worked is limited to what will pass between the swing away blade guard and the fence.
Where can I find the heavy duty jointer instruction manual?
6” HEAVY-DUTY JOINTER 6” HEAVY-DUTY JOINTER MODEL G1182 INSTRUCTION MANUAL COPYRIGHT ﾂｩ 1992 BY GRIZZLY INDUSTRIAL, INC. REG. #TX 3 176 562 WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC. REVISED FEBRUARY, 1999. PRINTED IN U.S.A. -2- G1182 6″ Heavy-Duty Jointer
How to maintain balance when operating a jointer?
Maintain you balance when operating the jointer; do not overreach or use excessive force to perform any operation. Establish a comfortable position prior to starting. 16. Never move hands directly over the cutterhead. Keep hands at least 12 inches from the cutterhead at all times.
How big should the stock be on a jointer?
Never joint stock less than 12” inches long. As the board starts over the cutterhead, the corner is very likely to catch, throwing the wood out of your hand and allowing the fingers to drop into the revolving cutterhead. Always stand to the left and out of line of the cutterhead knives.
What kind of fence is a FEA Tures jointer?
The G1182 fea- tures cast iron construction for rigidity and strength, a solid cast iron fence, a steel cabinet with built-in chip chute, 1/2″ rabbeting capacity, and convenient levers for raising and lowering the infeed and outfeed tables.