How much horsepower does a IH 1066 have?
How much horsepower does a IH 1066 have?
The International Harvester 1066 is a farm tractor that was made by International Harvester from 1971 to 1976. The 1066 has a six-cylinder diesel engine and about 105 drawbar and 125 PTO horsepower. The 1066 is significant for its popularity, with over 50,000 units having been built in its six-year run.
How much fuel does a 1066 hold?
International Harvester 1066
| International Harvester 1066 Engine | |
|---|---|
| International Harvester 6.8L 6-cyl diesel | |
| Fuel tank: | 42 gal 159.0 L |
| Engine details … |
How much does a 1066 International tractor weigh?
International Harvester 1066
| Dimensions & Tires | |
|---|---|
| Wheelbase: | 105 inches 266 cm |
| Weight: | 12148 to 13345 pounds |
| Front tire: | 11L-15 |
| Rear tire: | 18.4-38 |
How tall is a 1066 International?
International Harvester 1066 Dimensions
| Dimensions | |
|---|---|
| Wheelbase: | 105 inches 266 cm |
| Length: | 165 inches 419 cm |
| Width: | 98 inches 248 cm |
| Height (exhaust): | 11 inches 27 cm |
How many horsepower is a Ford 8700 tractor?
Ford 8700
| Ford 8700 Power | |
|---|---|
| Drawbar (claimed): | 96.0 hp 71.6 kW |
| PTO (claimed): | 110.58 hp 82.5 kW |
| Drawbar (tested): | 96.05 hp 71.6 kW |
| PTO (tested): | 110.58 hp 82.5 kW |
How tall is a 1066?
Is the Farmall Harvester 1066 the same as the International Harvester?
Note: the Farmall model 1066 is the same as the International Harvester 1066. The following data is from the 1066 listing. full engine details full dimensions and tires
How much horsepower does an International Harvester have?
The 1066 engine was altered in 1973 to increase horsepower. Variants 1066 Hi-Clear: high-crop International Harvester 1066 Power Drawbar (claimed): 108 hp 80.5 kW PTO (claimed): 126 hp 94.0 kW Drawbar (tested): 105.95 hp 79.0 kW PTO (tested): 125.68 hp 93.7 kW power test details
Why was the 1066 Hydro called the hydro 100?
$21,100 (1976 ) The hydrostatic drive 1066 Hydro was later renamed the Hydro 100. This was due to confusion over drawbar horsepower. The hydrostatic drive took a lot of power to operate, and the 1066 Hydro had much less power than a gear-driven 1066. Torque Amplifer (TA) was optional.
Where are the serial numbers on a tractor?
1066 Serial Numbers Location: Serial number plate on the left side of the tractor’s clutch housing. 1971: 7101 1972: 12677 1973: 24205 1974: 34949 1975: 46855 1976: