How do I use WPS on my fritzbox?

With WPS, connecting a wireless device with the FRITZ!Box is quick and easy….Connecting a Windows Computer with the FRITZ!Box via WPS

1. Make sure that the Wi-Fi function of your FRITZ!Box is turned on.
2. Start the Wi-Fi software on your computer.
3. Select the Wi-Fi network of your FRITZ!Box.
4. Click “Connect”.

How do you reset a fritzbox 7390?

In order to factory reset your AVM FRITZ!Box Fon WLAN 7390:

1. While your router is turned on, press the reset button and hold it pressed for about 30 seconds.
2. Still holding the reset button pressed, unplug the the router and hold the reset button for 30 more seconds.

Why is my Fritz box WIFI not working?

Click “Wi-Fi Channel” (“Radio Channel”) in the “Wi-Fi” (“Wireless”) menu. Enable the option “Set Wi-Fi channel settings automatically (recommended)”. Click “Apply” to save the settings. Now Wi-Fi connections to the FRITZ!Box are briefly cleared and then automatically re-established.

Does fritzbox support WPS?

With WPS (Wi-Fi Protected Setup) you can connect smartphones and other wireless devices with the Wi-Fi of the FRITZ!Box at the touch of a button.

How do I enable WPS on my router without the button?

What if my router doesn’t have a WPS button? If your router doesn’t have a WPS button, you can use the web based set-up with an internet browser to set up your Wi-Fi connection. The instructions for this method usually come with your router device.

How do you manually reset a Fritz box?

1. Plug a phone device into either ‘FON 1’ or ‘FON 2’ ports of your modem.
2. Dial the following numbers ‘#991*15901590*’.
3. Wait for up to 30 seconds and your modem will begin to reset to its factory settings.

How do you reset a Fritz box button?

Resetting the FritzBox by phone

1. Telephone connected to the FritzBox and “pick up”.
2. Enter the following code using the keypad: # 991 * 15901590.
3. You should now hear a signal tone in the phone, which confirms that the FritzBox has received the command.
4. The FritzBox is reset and should react again after a few minutes.

How do I access my fritzbox?

You can either enter http://fritz.box or the IP address of the FRITZ!Box (http://192.168.178.1 in the factory settings) to open the user interface. In addition, you can always use the emergency IP http://169.254.1.1 to access the FRITZ!Box.

What is connect WPS?

Wi-Fi® Protected Setup (WPS) is a built-in feature of many routers that make it easier to connect Wi-Fi enabled devices to a secure wireless network. This information is provided to help connect your TV, Blu-ray Disc™ player, or other supported home video products to a wireless network using WPS.

Do you need to enable WPS on Fritz Box?

If you would like to integrate wireless devices into your wireless network using the WPS function, the WPS function must be enabled on your FRITZ!Box. Enable the WPS function “WPS enabled”. Select one of the methods for the WPS quick connection in the “Method” area.

Can a FRITZ Box connect to a DSL line?

2 FRITZ!Box Fon WLAN 7390 An Overview The FRITZ!Box connects your computers directly with your DSL or VDSL line. Each connected computer can establish an Internet connection over the FRITZ!Box. As a WLAN access point, FRITZ!Box offers you the possibil- ity of connecting your computer to the DSL or VDSL line wirelessly.

What are the licensing conditions for Fritz Box?

The licensing conditions are specified in the FRITZ!Box Fon WLAN 7390 user interface: Open the user interface as described on page 28, click the question mark icon at the upper right, and open the “Legal Notice”.

Is the FRITZ Box software protected by copyright?

FRITZ!Box Fon WLAN 7390 2 Legal Notice FRITZ!Box Fon WLAN 7390 This documentation and the software it describes are protected by copyright. AVM grants the non- exclusive right to use the software, which is supplied exclusively in what is known as object code format.