Lifehacks

How do I reset my Parrot Bluetooth kit?

by Ellenor Mcfarland

How do I reset my Parrot Bluetooth kit?

How to reset a Parrot MKi9000

  1. Turn on the MKi9000 and wait about 20 seconds for the kit to fully turn on.
  2. Press the centre button on the remote and rotate until you get to “Settings”.
  3. Press and hold the RED and GREEN buttons on the remote control for 2 to 3 seconds.

How do I reset my Parrot hands-free?

1. Go into Settings / Bluetooth / Paired Devices and click on a phone you wish to remove. Press centre knob and scroll down to “delete”, then press GREEN button to confirm deletion. Repeat this process to remove all paired phones not required.

How do I pair my Parrot Bluetooth car kit?

Parrot Rhythm N’Blue:

  1. Start the car and ensure the car kit is on.
  2. Select Settings > Connectivity > Bluetooth.
  3. Enable Bluetooth and select New Paired Device.
  4. Activate Bluetooth on your phone, and search for Bluetooth devices.
  5. Select your Parrot Kit ( Rythm’n’Blue)
  6. Enter “1234” as Passkey, press OK.

Why is my car Parrot not working?

This may be one of two issues: Check to make sure that the fuse on the battery line is still good and the battery line connections are still good. Check to make sure that the battery line is in fact connected to the battery and not also tied in with the ignition line.

How do I reset my parrot?

How to reset a Parrot MKI9200

  1. Turn on the MKi9200.
  2. Press the centre button on the remote and rotate until you get to “Settings”
  3. Enter Settings menu and navigate down to “Advanced Settings”
  4. When in Advanced Settings menu select “Factory Reset” and press the centre button on the remote.
  5. The MKi9200 will now re-boot.

How do I reset my parrot MKi9100?

Reset procedure:

  1. Turn on the MKi9100.
  2. Press the centre button on the remote and rotate until you get to “Settings”
  3. Enter Settings menu and navigate down to “Advanced Settings”
  4. When in Advanced Settings menu select “Factory Reset” and press the centre button on the remote.
  5. The MKi9100 will now re-boot.

How do I reset my parrot MKi9100 without remote?

When at “Settings” use the Phone Button (accept call button if there are 2 phone buttons) to enter menu and scroll down to “Advanced Settings”. Again, press Phone button to confirm. Scroll down to “Factory Reset” and press Phone button to confirm. The MKi9100 or MKi9200 will then re-boot after clearing the memory.

How do you factory reset a parrot mki9200?

Again, press Phone button to confirm. Scroll down to “Factory Reset” and press Phone button to confirm. The MKi9100 or MKi9200 will then re-boot after clearing the memory. After re-boot search for the Parrot from your phone’s Bluetooth menu and select the Parrot.

Is there a reset button on the parrot ck3100?

It is a common internet myth that you can just reset the CK3100 by holding down the Red and Green buttons (as per the CK3000 Evo). This does not work.

Can a parrot ck3100 handsfree car kit be re-flashed?

Re-programme the CK3100 with the latest Parrot firmware (V5.00c). The CK3100 can either be re-flashed with a USB update cable (which we supply) or you can re-programme it over a Bluetooth connection with the Parrot update tool.

How long does a parrot MKI remote last?

All MKi remotes contain a CR2032 battery and it is common for people to forget to change them – they typically last a year to 18 months in normal use. 1. Turn on the MKi9000 and wait about 20 seconds for the kit to fully turn on. 2. Press the centre button on the remote and rotate until you get to “Settings”.