At what revs does vtec kick?

our vtec kicks in at around 4200 to 4500 rpm depending on eninge temp, oil presure and other things. the s2000 vtec kicks in at 6000 rpm. redline is high on those cars, lot of time in vtec…

Is i VTEC fast?

The VTEC system uses two camshaft profiles and hydraulically selects between the two. The incredible feature of this technology is that the engine can have the low-speed and high-speed camshafts in the same engine. In fact, the main idea with Honda i-VTEC is to have the maximum engine performance at every RPM range.

Is it bad to hit vtec?

Registered. Not hitting vtec ATLEAST once a day can cause both problems to the driver, and the car. Without hitting vtec daily- the driver can develop a “light” foot.

Is VTEC Turbo?

The VTEC TURBO engine produces more torque than the 2.4L naturally-aspirated engine, thanks to its turbo. The VTEC TURBO allows a small, 1.5L engine to perform as well as a 2.4L engine.

Which is better i VTEC or vtec?

i-VTEC (intelligent Variable Valve Timing and Lift Electronic Control) was introduced in 2002 to the North American market. Thus, the i-VTEC system provides all the benefits of the traditional VTEC design’s high-end open throttle power, while providing better engine operation at low and partial throttle. …

What happens when vtec kicks in?

Ever wonder what “VTEC kicking in” actually means? Like most other variable-valve timing systems, VTEC varies oil pressure to shift between different cam profiles. At higher engine speeds, the cam profile allows greater valve lift, which allows more air into the cylinder. This helps generate more horsepower.

Does VTEC add horsepower?

VTEC is a type of variable valve-timing system developed and used by Honda. At higher engine speeds, the cam profile allows greater valve lift, which allows more air into the cylinder. This helps generate more horsepower.

Why do Hondas rev so high?

Honda engines are usually oversquare, (shorter stroke, larger bore) then other engines of the same capacity, Allowing them to change direction more quickly. Hence they can rev higher. Power = torque times by rpm. revolutions is the only replacement for displacement.

Can VTEC kick in reverse?

In a straight line, ‘hitting VTEC’ often results in noticeably more power and a satisfying sound as the cam profiles shift. The clip below answers that age-old question and to our surprise, yes, you can hit VTEC in reverse, not that doing so serves any real purpose.

What does VTEC just kicked in, Yo mean?

Encyclopedia Dramatica. VTEC just kicked in, yo! is a catchphrase often used on 4chan (namely, /b/ and/p/) referring to sudden velocity expericened by a car with a VTEC motor.

What makes the VTEC kick in engine sound?

As engine speeds rise, a piston inside the rockers is pressurized with oil, locking all three cams together to increase valve lift. This is where that signature “VTEC kicking in” sound comes from.

When did Honda start using the VTEC system?

Introduced on motorcycle engines, Honda has been using its VTEC variable valve lift system on cars since 1989. It was first seen in the United States in the Acura NSX in 1991, years before it was spilling forth from the mouths of youth in the heat of the ’90s tuner car craze.

What happens to rpm when VTEC is kicked in?

And your RPM band when VTEC is kicked in is like 5000-redline, so it’s not particularly useful in daily driving. In my experience any form of a V6 engine does a better job.