Tips

How many hours can you get out of a Briggs and Stratton engine?

How many hours can you get out of a Briggs and Stratton engine?

With normal use and proper maintenance, a lawnmower should expect to last at least 8-10 years. That converts to around 300 to 500 hours for a small engine and 750 to 1000 hours for a bigger engine. But there are many examples where larger ride-on lawnmowers last for a much longer time.

Why is my push lawn mower turning over but not starting?

Loose, Dirty or Disconnected Spark Plug in Your Lawn Mower: Check it out, clean off debris, re-connect and tighten. Dirty Air Filter: Clean or replace. Fuel Not Reaching the Engine: Tap the side of the carburetor to help the flow of gas. If this doesn’t work, you might need a new fuel filter.

How do you fix a locked engine?

If you have an engine that seized from sitting for a long time, pull the spark plugs out of all the cylinders. Fill the cylinders with engine oil and let it sit for a few days. Then, try turning the engine over with a breaker bar. If it moves, you may be able to salvage the engine.

What are some common problems with Briggs and Stratton engines?

Briggs and Stratton engines are known to develop a few common issues, such as the engine overheating or smoking, the engine not starting at all, and the engine running poorly during use, states the company. These issues are generally repairable by the owner instead of requiring a mechanic’s aid.

Why does my Briggs and Stratton riding mower not start?

Carburetor Problems Cause Mower Engines Not To StartThe carburetor regulates how air and fuel move through the engine to power your equipment. If it is dirty, that can cause poor engine performance or starting problems. Disconnected, dirty or fouled spark plugs are common causes for engines that won’t start.

How to fix a Briggs and Statton 12.5 engine?

Removed and cleaned Carburetor (assuming float was stuck) — Also cleaned choke linkage and throttle control linkage — No change — Less fuel in filter housing. 4. Pulled flywheel and checked shear pin — Pin okay, no looseness in flywheel.

What to do if your Briggs and Stratton snow blower has a problem?

If you don’t have one of these, we recommend visiting your Briggs & Stratton repair dealer to perform the test and check that these components are in good shape. Use this simple Q&A format list to troubleshoot small engine problems you may experience with your lawn mower, snow blower or other power equipment.