What temperatures does the plasma cutter reach when cutting?

The plasma cutter jet reaches 40,000° F, or 22,000° C. That’s a scary thought when you think who might be waving around one of these high-tech machines, but I love using them. Plasma cutters make cutting through almost any solid slab of metal a breeze.

Is plasma cutting thermal cutting?

Plasma arc cutting is another thermal cutting process. However, unlike flame cutting, it uses an electrical arc to ionize and heat a gas to form plasma that is used to cut the material. The workpiece is made to be part of the electrical circuit with the torch by using a grounding clamp.

How thick can a 30 amp plasma cutter cut?

3/8 in.
Designed for portable repair work and small business project use, CUT-30 Plasma Cutter cuts a thickness of 3/8 in., and the max severance thickness is 1/2 in., Specifications: Type: DC Air Plasma Cutter, Supply Power: 115V/230V/60Hz/1-Phase, Rated Input Current: AC-115V/30A & AC-230V/15A, Cutter Current Range: AC-115V …

How many amps does it take to run a plasma cutter?

For 3/8” cut, 40 amps works out well for most brands of plasma cutters. For ½” cut, 50 amps works out well, etc. Keep in mind this isn’t the maximum thickness of cut that a plasma cutter is capable of cutting but rather, it is a good rule to follow for decent cutting speed and quality.

Do all plasma cutters need air compressor?

Plasma cutters need air pressure to cut in a two-stage process. Therefore, all plasma cutters need an air compressor to generate enough air pressure for the task. If you buy a plasma cutter without a built-in source of air, you’ll need a separate air compressor.

What gas is needed for plasma cutting?

Compressed Air is the most commonly used gas for lower current plasma cutting and works well for most metals from gauge thickness to 1 inch. It leaves an oxidized cut surface. Compressed air can also be used for plasma gouging on carbon steel.

Can you use a plasma cutter to cut copper?

Plasma cutters offer flexibility to cut most types of metal in varying thicknesses, including steel, stainless, aluminum, copper, bronze, brass, titanium, Inconel and other materials.

How thick of steel can a plasma cutter cut?

about 1 inch
Plasma cutters are used to perform cutting and gouging operations, with the average hand-held system capable of cutting a maximum metal thickness of about 1 inch. Plasma typically requires a source for compressed air and a substantial amount of electrical power.

Where can I find a CutMaster plasma cutting power supply?

Plasma Cutting Power Supply CutMaster™ 40mm SL100 1Torch™ Operating Manual Number 0-5084 Published by: Thermal Dynamics Corporation 82 Benning Street West Lebanon, New Hampshire, USA 03784 (603) 298-5711 www.thermal-dynamics.com Copyright 2008, 2009, 2010 by Thermadyne Corporation All rights reserved.

How big is a thermal dynamics plasma cutter?

Affordably priced, high quality 120V 1/4″ (6 mm) plasma system. At 230V, the Cutmaster 42 delivers 40A, a recommended cut of 3/8”. Will cut all day at its recommended cutting capacity.

What are the features of a 40mm Cutmaster?

40mm CUTMASTER 380- 400 Art # A-09209 PLASMA CUTTING SYSTEM 40mm CUTMASTER Rev. AD Date: February 25, 2010 Manual # 0-5084 Operating Features: Operating Manual WE APPRECIATE YOUR BUSINESS! Congratulations on your new Thermal Dynamics product.

How much power does a thermal dynamics Cutmaster 152 have?

The Cutmaster 152 packs 120 amps of cutting power in a compact, 62 lb package. Recommended cut is 1 ¼” (30mm) and max cut of 2? (50mm). Multi-voltage 1 or 3-pahse input.