How do you turn on a Hubsan drone?

Mode 1: Push the left stick to the upper left position and right stick to the upper right position and hold, then power on the transmitter. Rotate both sticks twice. Hold down any trim until the LED on the transmitter blinks red, indicating successful calibration.

How long does the Hubsan x4 take to charge?

It features a USB connection allowing it to be charged using a computer or other USB charger. It will allow the quadcopter to fly for up to 7 minutes and charging is estimated to take approximately 40 minutes.

How do I fly my X4 desire?

The Aileron stick controls left and right flight. Push the stick to the left and the X4 will fly to the left. Push the stick to the right and the X4 will fly to the right. The X4 will keep the current status when the stick is in the center.

How do I charge my Hubsan X4 battery?

1 Take out the battery from the bottom of the X4. 4.1. 2 Connect the battery with USB charger, then connect the USB charger to a computer or other USB connector, such as a smartphone charger. The LED lights up while charging and turns o when charging is complete.

What is the range of the Hubsan H501S?

The H501S High Edition offers an expanded control range of up to 1476′ (450m).

How big is the Hubsan X4 H107D FPV camera?

The propellers are 5.5 cm and the quadcopter itself is 7.5 cm x 7.5 cm x 4.0 cm. The quadcopter weighs 57 grams including the battery. The Hubsan X4 H107D comes with a 380mAh Li-Po battery, and an FPV remote controller. The quadcopter is white with red and white propellers.

How long does a Hubsan H107D fly for?

The Hubsan X4 H107D model is an FPV version of the H107C. With a small price of 65 USD, the package includes the remote control with FPV screen, and the quadcopter. The quad can fly for around 6 to 12 minutes on full charge, and takes around 45 minutes full charge.

How to calibrate the Hubsan X4 remote controller?

Once the connection is done, then you can turn on the remote controller where you’ll see the Compass Calibration option. Click on the “Calib Compass 1” option. After pressing the button, press the drone on the flat surface. Hold it in your hands and rotate it in clockwise. Keep on rotating until you get the prompt on the screen “Calib Compass 2”.

How do you binding a Hubsan X4 drone?

If the drone is not getting started, probably it has not binded with the controller. For more information, you can read the manual. Binding is simple, switch ON the drone and then the controller, then hold the throttle by bringing it down and hold it there till the lights become steady and then you can release the throttle.