What is the diagnostic code for a Volvo?

Volvo has its own diagnostic trouble code (DTC) designations that adhere to the in-house Volvo On-board Diagnostics protocol (called DII from model year 1999).

What is the DTC code on a Volvo?

It cannot provide the comprehensive range of information available from the Volvo On-board diagnostics system. Volvo has its own diagnostic trouble code (DTC) designations that adhere to the in-house Volvo On-board Diagnostics protocol (called DII from model year 1999).

Is there an OBD code for Volvo XC90?

OBD II contains only emissions related diagnostic trouble codes (DTCs) and parameters. It cannot provide the comprehensive range of information available from the Volvo On-board diagnostics system.

You Must Read All Codes before Clearing On Board DTC Code Generic OBD Code Meaning A1 — Transmission 111 No faults found 112 Solenoid S1 short circuit to battery vol 113 Transmission control module (TCM) fault

Where is the OBD-2 port on a Volvo?

The OBD-II port is physically the same. I used my reader on my ex’s 2004 V70R — lower driver’s side interior, near your left knee — and it correctly reported OBD-II codes. Here is the specific 1999+ Volvo DTC code page for “the rest of the story”.

Where are the diagnostic connectors on a Volvo?

To start, the Ignition key must be in position II, engine not running. Open the hood. Locate the two diagnostic sockets just inboard of the washer fill cap. The “A” connector (shown above) has a jumper that is stored in the lid of the “A” diagnostic connector. The jumper is used for both diagnostic connectors.

What is the OBD code for a 960 / 90 car?

OBD-II Scanners and Tools for 960/90 Cars Fuel Injection and Ignition Diagnostic Procedures in Earlier Bosch LH-Jetronic 2.2: EZK 102/115/117/118 for B280/B200/B230FT Note: For further information about specific symptoms, fuel injection and ignition components, and sensors, see the relevent FAQ files. Abbreviations: AMM = Air Mass Meter